Semi-automatic welding machine SERVIMIG 210 MP

Servimig 210MP is a manual semi-automatic multiprocess welding machine, that enables to weld with MIG/MAG, MMA and TIG process. Welder is powered from a single-phase network 230V and has 200A maximum amperage for all welding methods. Servimig 210 MP is equipped in 2-roller wire feeder and gives possibility to use 1kg (100mm) and 5kg (200mm) spools from 0.6 to 1.0mm wire diameter. Welder is equipped in EURO torch connector. Servimig 210 MP has option to change the polarity and use self-shielded flux core wire.

Quite a light weight of welder ( ) makes it very good choice to use it in fieldwork for assemby and finishing jobs. It can be also used for low volume production to weld such materials as carbon steel, stainless steel and aluminium with synergic mode. The welder has a possibility of working with 12kVa power generator.

Below there is a presentation of Servimig 210 MP main panel and it’s all main functions for all welding processes - MIG/MAG, MMA and TIG:

L1 – Welding Process Selection : MIG/MAG, MMA or TIG LIFT

L2 – LCD Graphic Display

L3 – „Setup Key” for setting secondary parametres

L4  - Program „Save & Load” key (maximum of 20 programs to be saved/loaded);

L5 – Main Regulation Knob ( Volts/Amps)

L6 – Synergic Program Selection (SYN ON) / Adjustment of the Electronic Inductance Value (SYN OFF)

L7 – Left Regulation Knob:

MMA – Hot Start parameter setting;

TIG – Time Slope Down setting;

MIG/MAG – wire feed speed / balance setting;

MMA welding method

MMA welding method amperage (M1) could be set between 5A-200A. There is additional HOT START function (M2), which helps to start arc. Parameter is set in 0-50% range.

TIG welging method

TIG method arc starts without high frequency (HF) through contacting with material. Amperage could be set between 5A-200A. Additional SLOPE DOWN function gives possibility to smoothly stop the arc without rapid burnout only after slighlty moving up the the torch when welding wants to be finished. Below picture presents how the full process works:

LIST OF PROGRAMS

Picture presents the list of synergic programs which are possible to set in Servimig 210MP for MIG/MAG welding method. Welders gives a possibility to weld carbon steel with CO2 or gas mix M21 (Ar/CO2). There are also programs for stainless steel, aluminium and brazing (CuSi) welding.

MAIN MENU LCD display shows the chosen synergic welding mode (P1). With left regulation knob (P2) wire feed speed and balance could be set. Right knob (P3) is used for setting welding material thickness. Welder has the option for turn off the synergic mode and work with manual mode with the possibility of setting the electrical inductance value using MATERIAL button (P4).

MENU SETUP

In MIG/MAG welding mode, SETUP mode gives options for secondary parametres setting for synergic and manual welding:

2T/4T/SPOT (S1)  – selection of the 2Stroke / 4Stroke / Spot Welding Mode ( SPOT TIME – regulation of the maximum duration of Spot Welding Time);

SLOPE UP (S2) – regulation of the time the wire needs from the striking speed to the welding speed;

BBT – Burn Back Time (S3) – regulation of the length of the wire protruding from the torch at the end of welding;

IND (S4) – regulation of the electronic inductance value;

POST GAS (S5) – regulation of the gas outflow time at the end of welding;

HOT START (S6) – percentage regulation of increase of welding current to make start easier together with hot start time duration and duration of the welding current slope down;

HOT START / CRATER FILLER (S7) – percentage regulation of hot start and crater filler together with duration of the welding current slope down.  

Set consists of:

• Servimig 210MP power source with 16A schuko plug cable;
• Trafimet Ergoplus MB25 3m length welding torch;
• gas regulator;
• ground cable 3m;
• electrode cable 3m;
• gas hose 3m;
• 0.8-1.0mm rollers for steel and aluminium.